Choosing brake pads starts with friction material. Semi-metallic pads handle heat well and cost less, but they wear rotors faster and can be noisy. Ceramic pads run cooler, quieter and cleaner, which suits stop-and-go city driving in Baghdad, yet they fade sooner under heavy loads. NAO organic pads are gentle on rotors and quiet, but they wear quickly. The pad must match the rotor: a hard pad on a soft, worn rotor shortens rotor life and gives uneven braking. Check the OEM number for your exact model, year and trim, and compare it with the number printed on the box.
Warning signs matter more than brand names. A high-pitched squeal when the pedal is released usually means the wear indicator is touching the disc. Vibration through the pedal, a longer stopping distance or a car that pulls to one side under braking means the pads, rotors or fluid need attention. New pads need bedding-in: make eight to ten moderate stops from about 60 km/h, letting the brakes cool between them. Brake fluid absorbs moisture, so old fluid boils in Iraqi summer heat and the pedal sinks; replace it every two years.
Counterfeits are common. Genuine pads carry a clean, evenly printed box, a batch number, a hologram or a scratch code, and friction material with no loose metal flakes. Cheap copies often lack a batch number, smell of rubber, or have uneven backing plates. For hot, dusty roads in Basra or on desert trips, prefer semi-metallic or a quality ceramic pad rated for high temperatures, keep the caliper slides clean, and inspect pads every 10000 km or at the first sign of noise.