Counterfeit parts in Iraq often enter through informal wholesale channels, and packaging is where most fakes fail first. Genuine boxes use sharp offset printing, the part number appears in the same font on box and label, and the barcode resolves to the manufacturer catalogue. Fakes show blurred edges, an off-centre logo, a serial stamped in the same ink as the label, or no hologram. A hologram proves nothing by itself: check that the box serial matches the number etched on the part and the OEM number for your model and year.
Price is the second signal. A filter sold in Baghdad or Basra at a third of the distributor price is a different product, not a bargain. Weigh it: a fake oil filter is often 20 to 30 percent lighter because the steel is thinner and the media has less surface area. Look at cast marks and at machining on sealing faces; genuine parts have clean, uniform edges, while copies show coarse flash, uneven threads and paint over machined surfaces. Fake brake pads are the worst case, since the friction material glazes when hot.
Buy from an authorised distributor who provides an invoice with a stamp, and inspect the part before fitting. Compare it with the old part, measure gasket thickness, spin the filter to feel the bypass valve, look for metal shavings inside a new housing, and check how a belt is built. On fakes the filter gasket usually fails first, brake pads fade within a few thousand kilometres, and belts crack at the ribs. If anything is unclear, stop and verify the OEM number with the dealer.